More than IP

  Fibre Channel  







  Member of  

  1/2/4/8/16/32Gbps Fibre Channel


The Fibre Channel (FC) is logically a bi-directional point-to-point serial data channel, structured for high performance information transport. Physically, Fibre Channel is an interconnection of one or more point-to-point links. Each link end terminates in a Port. Ports are fully specified in the Physical Interface (FC-PI) specification and Framing and Signaling (FC-FS) specification. Fibre is a general term used to cover all physical media supported by Fibre Channel including optical fiber, twisted pair, and coaxial cable.

Serial data streams are supported at data rates of 1.06Gbaud, 2.12GBaud, 4.25GBaud, 8.5GBaud 14.025GBaud and 28.050GBaud (32GFC).

Fibre Channel is structured as a set of hierarchical functions as illustrated in Figure 1. Fibre Channel consists of related functions FC-0 through FC-3. Each of these functions is described as a level. Fibre Channel does not restrict implementations to specific interfaces between these levels.

MorethanIP solutions includes FC-1, FC-2 Transport Cores and combined FC-1 / FC-2 Transport Cores for 1/2/4/8Gbps, 16Gbps and 32Gbps applications.

MorethanIP 1/2/4/8/16Gbps Fibre Channel Cores solutions are available for FPGA and ASIC, 32Gbps Fibre Channel Core is available for ASIC use only.


  Upper Level Protocols (ULP)
  Fibre Channel Core Solutions

1/2/4Gbps FC-1 and FC-2 Transport Core

1/2/4/8Gbps FC-1 and FC-2 Transport Core

16Gbps FC-2 Transport Core
(Can be used for 32GFC Applications in ASICs)

16Gbps FC-1 Core

32Gbps FC-1 Core

16 / 32Gbps FC-1 Core